Belgard Hardscapes

Belgard Paver Installation in Jacksonville, FL

Belgard is one of the hardscape lines we build with across Duval, St. Johns, Clay and Nassau counties — driveways, pool decks, patios, walkways, retaining walls and fire features. If you have already picked a Belgard paver, or you are trying to decide between Belgard and another line, this page covers what actually matters once the pavers are in the ground in Northeast Florida.

Why Belgard works in Northeast Florida

Concrete pavers suit this climate for reasons that have little to do with looks. A paver field is made of individual units over a compacted base, so it flexes with ground movement instead of cracking the way a poured slab does over our sandy, shifting soils. Water drains through the joints rather than sheeting toward the house. And when something does go wrong — a settled corner, a stained unit, a utility repair — you lift the affected pavers and reset them, rather than saw-cutting and patching a slab you can never match again.

Belgard's range covers most of what Jacksonville homeowners ask for, from tumbled old-world textures through to large-format modern slabs. Its collections are organised by look — Heritage, Metropolitan, Natural, Artisan and Environmental — alongside retaining and freestanding wall systems.

The honest part: paver brand matters far less than base preparation. We have been called to fix more failed Belgard, Tremron and generic paver jobs caused by a thin or poorly compacted base than by anything wrong with the paver itself. Ask any installer how deep they excavate and how they compact before you ask which brand they carry.

What we build with Belgard

Driveways

Full tear-out of the old surface, proper sub-base depth for vehicle loads, and edge restraint that keeps the field from spreading at the apron.

Pool decks

Slip-resistant textures and lighter tones that stay cooler underfoot, with drainage planned away from the coping and the house.

Patios and walkways

Laid to the grade your yard actually has, so water leaves the space instead of pooling at the low corner after a summer storm.

Walls and fire features

Retaining and freestanding walls, seat walls and paver fire pits, built on footings sized for our soils rather than set on grade.

Belgard compared with the other lines we install

We are not a single-brand installer, which means we have no reason to push you toward one. In practice the choice usually comes down to the specific unit rather than the manufacturer's name:

  • Belgard — the widest style range of the lines we carry, strong for large-format modern slabs and for wall systems that need to match the paver field.
  • Tremron — a Florida manufacturer, so lead times and colour availability are often better here, and the palette is tuned to Florida homes. We install their Olde Towne, Mega-Cambridge, Catalina and Stonehurst lines among others.
  • Poured concrete — cheaper on day one and still right for some applications. We will tell you when it is, on our concrete installation page.

If you are still weighing materials rather than brands, start with paver installation for the general process, or pool decks if the project wraps a pool.

How a Belgard job runs

  • On-site measure and quote. Free, and you get a fixed written price rather than an allowance that moves later.
  • Excavation and base. Depth set by use — a driveway carrying vehicles is not the same build as a patio.
  • Laying and cutting. Pattern set out from the most visible edge so the cuts fall where you will not look.
  • Edging, sand and compaction. Polymeric joint sand and edge restraint, then a final pass to lock the field.
  • Clean-up and walk-through. We show you the drainage falls before we leave.

Belgard paver questions

Are Belgard pavers worth it compared with cheaper pavers?+

The unit cost difference between name-brand and generic pavers is usually a small share of the total job, because most of the cost is excavation, base material and labour. Where the money shows is in colour consistency across pallets, the availability of matching wall and coping units, and being able to get the same paver years later for a repair or an extension. On a driveway you plan to keep, that matters.

Do Belgard pavers get hot around a pool?+

Colour drives surface temperature far more than brand does. Light, sand and ivory tones run noticeably cooler underfoot than charcoal or deep reds in full Florida sun. If bare feet are the priority we will steer you to the lighter end of the range, or to travertine, which sheds heat better than any concrete paver.

Will the colour fade?+

Some mellowing is normal on any concrete paver under this much UV, and it typically settles within the first year or two rather than continuing indefinitely. Sealing slows it and deepens the colour, at the cost of a reseal every few years. Plenty of our customers skip sealing entirely and are happy with the weathered look.

Can you match an existing Belgard patio?+

Often, yes, if the line is still produced. Bring us a spare unit or a clear photo with something for scale. Where an exact match is no longer made, the usual answer is a deliberate border or banding in a complementary unit, which reads as design rather than as a repair.

Do I need a permit for a paver driveway in Jacksonville?+

Usually yes for a driveway, because it connects to the public right of way, and requirements differ between Duval, St. Johns, Clay and Nassau. Patios in the back yard are often lighter-touch. Permitting is ultimately the homeowner's responsibility, but we build to code and will tell you what your jurisdiction expects before you start.

Get a fixed price on your Belgard project

Free on-site measure across Jacksonville, the Beaches, St. Augustine, Orange Park, Fernandina and Ponte Vedra. No obligation, and a written number you can hold us to.

Request a free estimate
Deck Lighting CTA

Ready to work together? Call Today For A Free Quote

Contact our outdoor contractor today for a free in-home design visit.