Materials We Build With

Decking and Paver Brands We Install in Jacksonville

We are not a single-brand contractor. That matters more than it sounds, because an installer tied to one manufacturer will always recommend that manufacturer. We carry the lines below, we price them against each other, and we will tell you when the cheaper board is the right board for your site.

Decking

Trex

The best-known capped composite, and the widest colour range we carry. A safe, well-supported choice for most elevated decks.

TimberTech

Capped composite lines with a strong fade and stain record. The sibling range to AZEK, from the same manufacturer.

TimberTech AZEK

Advanced PVC with no wood flour at all. The coolest surface and the strongest warranty of anything we install, at the highest price.

MoistureShield

The composite we specify when a deck sits low to grade or near water — it is approved for ground, in-ground and underwater installation.

AridDek

A waterproof aluminium deck system, used where the space underneath the deck needs to stay dry and usable. Covered on our deck installation page.

Wood

Pressure-treated pine, cedar and dense tropical hardwoods. Still the right answer on some budgets and some looks. See wood decks.

Pavers and hardscape

Belgard

The widest style range of the paver lines we carry, and wall systems that match the paver field. Driveways, pool decks, patios and fire features.

Tremron

A Florida manufacturer, so lead times and colour availability are usually better here. We install Olde Towne, Mega-Cambridge, Catalina and Stonehurst among others — see paver installation.

Travertine and natural stone

The coolest surface underfoot around a pool, with natural grip when wet. Covered on our pool deck page.

The part most brand pages will not tell you: on a deck, the boards are the part you see and the framing is the part that decides how long it lasts. On a paver job, the brand of paver matters far less than how deep the base is and how well it was compacted. We have replaced more failed decks and sunken patios caused by the work underneath than by anything wrong with the material on top. Ask any installer about the ledger flashing and the base depth before you ask which brands they carry.

How we help you choose

We quote more than one option. If you are weighing AZEK against a composite, you get both numbers on the same estimate so the gap is visible rather than argued about.
Site first, brand second. A shaded elevated deck and a full-sun pool surround call for different boards. So does a lot backing onto the marsh.
Colour before technology. Every heat claim in this industry is measured against the same colour. A light board in a cheaper line will usually beat a dark board in an expensive one.
Warranties get read. Structural warranties cover the board, never the frame and never the labour. We will point out what is actually covered before you sign anything.

Not sure which material fits your project?

Free on-site measure across Jacksonville, the Beaches, St. Augustine, Orange Park, Fernandina and Ponte Vedra. We will walk the site, talk through the options and put real numbers against each.

Request a free estimate